SKET

SKET, par_type, par_name, value1, value2, value3;

Defines settings for the SKETCHER interface

The SKET command assigns grid settings and group reference names.
All Sketcher items with the same body, material and layer reference number belong to the same group. A group reference name can be assigned to make the model structure more understandable. Reference names of individual components are directly assigned with other pre-processor commands.
SKET settings are model-specific and support the data exchange with the SKETCHER interface. Default values are applied if no SKET command is defined.
Default grid settings can be set in ./settings/init-file.json.

Input Data⚓︎

Parameter	Description
`par_type`	Sketcher parameter type to be assigned → `grid` = Assign grid settings → `group` = Assign group reference names
`par_name`	If par_type=`grid`: → `g_size` = Assign grid size → `g_snap` = Activates/deactivates grid snap → `a_size` = Assign angle size → `a_snap` = Activates/deactivates angle snap If par_type=`group`: → Alphanumeric name, has to start with a letter
`value1`	If par_type=`grid`: → `g_size` = Grid size value (double) → `g_snap` = 1 grid ON, 0 grid OFF → `a_size` = Angle grid size value in degree (double) → `a_snap` = 1 grid ON, 0 grid OFF If par_type=`group`: → Body reference number of the group
`value2`	If par_type=`grid`: unused If par_type=`group`: → Material reference number of the group
`value3`	If par_type=`grid`: unused If par_type=`group`: → Layer reference number of the group

Example of typical SKET commands:

SKET,grid,g_size,10;
SKET,grid,g_snap,1;
SKET,grid,a_size,5;
SKET,grid,a_snap,1;
SKET,group,anchors,0,1,1;
SKET,group,mass_body,1,1,1;